Vodafone Station Firmware Hack
2021年10月20日Download here: http://gg.gg/w9u6i
*Vodafone Station Firmware Hack Apk
*Vodafone Station Firmware Hack Android
*Vodafone Station Firmware Hack Pc
*Vodafone Station Firmware Hack DownloadUpgrade modem firmware
This page explains how you can upgrade the firmware on the following Vodafone modems:
Jul 05, 2020 Here we talk about some free tricks through which you can get Vodafone free Data Hack and talk time recharge.Readers, if you are a Vodafone user, so it’s a big opportunity to get free balance recharge.Through Vodafone Free Recharge Hack Trick you can free 3G internet and many other small data recharges.If you are Android users and fed up with. Vodafone Station Hacking Ceskho-OpenCode feat tails92 “Vodafone Station hacking” – pag. 1 INTRODUZIONE Breve guida alla modifica del firmware interno alla Vodafone Station per poter usare la macchina infernale anche con altri operatori diversi da Vodafone.Vodafone Ultra Hub
H500-t Ultra Hub PlusVodafone B315 Vodafone B525 Vodafone wireless modem
(aka Vodafone HomeHub - HG659Vodafone B818Before you begin
You should only upgrade your modem’s firmware when requested by our Technical Support team.
We recommend that you backup your modem’s configuration. To find out how, select your modem and follow the steps for ’Back up your configuration’:
Please note: This option is not available on the Vodafone B525.How your settings could be affected
In most cases you will be able to update your modem’s firmware without any impact to your services. However, it is important that you are aware that this firmware update:
*Could remove any custom or advanced configuration settings in your modem
*May change the current default Admin password of your device
*If you have a phone(s) attached to your modem, there will be a disruption to services during the upgrade. You can minimize the impact by backing up and restoring your modem configuration.Steps
Select your modem:Ultra Hub and Ultra Hub Plus
*Download the firmware file to your computer:
> Download Ultra Hub firmware
> Ultra Hub Plus
*Open a web browser and go to 192.168.1.1
The Welcome screen appears
*Complete the following fields:
*Username: vodafone
*Password: You can find this on the bottom of your modem
*Click Log In
The Overview screen appears
*Click the Settings tab
*On the top drop-down menu, select Advanced Mode
*From the left-hand menu, click Firmware Update
The Firmware Update screen appears
*In the Manual Firmware Update section, click Select File
*Select the downloaded firmware and click Install update
The Firmware Update confirmation pop up appears
*Click Apply
The uploading Firmware File pop up appears
After the file is uploaded, the updated Firmware will begin installing
The firmware upgrade process takes about 5 minutes
Please ensure you do not turn of your modem while the Firmware is being installedVodafone wireless modem (HG659)
*Download the firmware file and save it to an easily accessible location on your computer
*Filename: HG659-16V100R001C206B026_main.bin
*File size: Approximately 18MB
*Browse to your modem’s admin page (usually http://192.168.1.1 by default)and log in with the following details:
*Default username Admin
*Default password, either:
VF-NZhg659 (note - case sensitive)
or
@ and then the last eight digits of your modem’s serial number. (E.g. @12345678)
*Before continuing, ensure that you have backed up your modem configuration
*Click the Maintain tab
*Click Device Management
*Click Firmware upgrade
*Click File and browse to the firmware file location on your computer
*Select the .bin firmware file, and click Upgrade
*Wait for the firmware upgrade to complete (this may take between 10 to 15 minutes and your modem will automatically restart when it completes)
*Do not navigate away from the page
*After the modem restarts, the modem interface appears. The firmware upgrade is now complete and your modem will automatically re-establish an internet connection. If you have a phone connected to your modem, the configuration file will automatically be downloaded and applied approximately 5-10 minutes after the upgrade.
Below is a list of changes in August 2016 firmware release.
*Separation of 2.4GHz and 5GHz SSIDs
*Improvement in 5GHz auto channel selection
*Update to DTMF signalling to improved compatibility.
N.B. Post upgrade, the modem will show 2 wireless networks instead of 1. The 2.4GHz network will show the SSID name, whereas the 5GHz network will now show the SSID name followed by -5g.
You will need to select either one or both depending on which network their device is capable of using with the preference being 5GHz where possible.Vodafone B818
*Open a browser and go to 192.168.1.1
*Enter your password
Note: The default password is listed on the modem sticker
*From the top-menu, click Advanced
*From the left-side menu, click Updates
*From the options below, select how you’d like to update your firmwareAutomatically
*Enable the Overnight updates toggle
*Click Check for Updates
Manually
*Click Local Update
The Local Update popup appears
*Browse for the downloaded file on your computer and then click Update
Vodafone B315
You can update your modem’s firmware using your PC connected to the modem via Wi-Fi or an Ethernet cable; or using an app on your smartphone (iOS or Android) connecting via Wi-Fi.
Please note that the firmware update process will take about 15-20 minutes.
Vinyl Master Pro V4 Keygen Torrent - DOWNLOAD (Mirror #1) d77fe87ee0 Download VinylMaster Xpt for Windows now from Softonic: 100%. Extras: Vinyl Sign Cutter. 2011 vinylmaster pro v4 0 crack - Kryptos Global Download - softpedia VinylMaster Ltr Vinyl Sign Cutter Software. VinylMaster Pro Crack With Activator VinylMaster Pro is an advancҽd and rҽliablҽ softwarҽ utility dҽvҽlopҽd to assist usҽrs in crҽating original signagҽ artworқ, with limitҽd ҽffort, allowing thҽm to gҽnҽratҽ grҽat quality rҽsults. Following an installation of a fairly modҽratҽ lҽngth, usҽrs can run thҽ application and sҽlҽct thҽ ’Dҽsign Modҽ’ thҽy wish to worқ. Vinyl master pro torrent.
The current firmware version is: 21.329.01.01.1085Update your modem’s firmware using your computer
Please ensure your computer is connected to your modem’s Wi-Fi or connected directly using an Ethernet cable.
*Using a web browser, log into your modem using the address http://192.168.1.1
*You will see a notification that the update is available
*Login as an admin user
The default username and password are both ‘admin’
*You will see a prompt to update your password, click LATER
*Select UPDATE NOW to start the process
*The software will begin downloading and then installing onto your modem
*Once completed, you will see a notification that update is done
*Login as an admin user
The default username and password are both ‘admin’
*Check your SSID (Wi-Fi name)
*Select Auto Update, click FINISH
*If you have the default admin login and password, you will be prompted to update this
*You’ll then have the option to update your Wi-Fi name
*The modem will then save your new configuration and confirm with SUCCESS
*You can then review the settings and you’re done.Update your modem’s firmware using your iOS/Apple device
Please note you will need the HUAWEI HiLink (Mobile WiFi) app, which is available for free from the Apple App Store - search for HUAWEI HiLink and download. Also available for iPad.
Please ensure your device is connected to the Wi-Fi from your B315 modem.
*Open the HUAWEI HiLink app
*The app will prompt you for login details for your device
*Login as an admin user
The default username and password are both ‘admin’
*You will see a notification that an update is available, click UPDATE
*The software will start downloading to your modem
*Once downloaded the modem will start updating itself
*Your modem will shut off the Wi-Fi connection and once available again you will need to reconnect to your Wi-Fi once the modem has completed updating its software and restored the Wi-Fi.
*If you have the default admin login and password, you will be prompted to update this
*You’ll need to enter ‘admin’ as your current password and think of a new one and confirm it
*You’ll then be prompted to login as administrator - use your new password!
*In the app, tap the SETTINGS icon - blue gear image top right to check on your device’s settings.
*There you’ll be able to see info about your device as well as where to see when updates are available in the future.
Update your modem’s firmware using your Android device
Please note you will need the HUAWEI HiLink (Mobile WiFi) app, which is available for free from Google Play - search for HUAWEI HiLink and download.
Please ensure your device is connected to the Wi-Fi from your B315 modem.
The app will prompt you for login details for your device.
*Login as an admin user
The default username and password are both ‘admin’
*You will see a message about using the default password, please hit CANCEL
*You will see a notification that an update is available, click UPDATE
*The software will start downloading to your modem
*Once downloaded the modem will start updating itself ‘The device is rebooting … please wait’
*Your modem will shut off the Wi-Fi connection and once available again you will need to reconnect to your Wi-Fi once the modem has completed updating its software and restored the Wi-Fi.
*If you have the default admin login and password, you will be prompted to update this
*You’ll need to enter ‘admin’ as your current password and think of a new one and confirm it
*You’ll then be prompted to login as administrator - use your new password!
*In the app, tap the SETTINGS icon - blue gear image top right to check on your device’s settings. There you’ll be able to see info about your device as well as where to see when updates are available in the future.
Vodafone B525
*Open a browser and go to 192.168.1.1
The Home screen appears
*From the top-right side of your screen, click Log in
*Complete the following fields
*User name:
*Password:
Please note: Your username and password were created when you first set up your modem
*Click Log in
*Click the Update tab
The Update screen appears
*From the options below, select how you’d like to update your firmware:
Automatically
*From the left-side menu, select Online Update
*Click Check for Updates
If there is a new firmware version available, you are given the option to download it.Manually select a file on your computer
*From the left-side menu, select Local Update
*Click Browse..
The File Upload window appears
*Find the file and click Open
*Click Update
After the update is complete, a confirmation message appears.Was this answer helpful?
Please note: we cannot respond to any requests made via this form; however, you can contact us for further assistance.Please help us to improve this answer *RequiredRelated AnswersHow to replace the Vodafone Station with your very own router
Vodafone forces its customers to use their modem/router, the ’Vodafone Station’: using any other router is impossible because authentication is being done via a custom PPPoE setup.
In the PPPoE packet there is a field named Host-Uniq which is used to separate packets from different PPPoE sessions: Vodafone requires the Station serial number to be put in this field as authentication.Hardware setup
A Linux router with root access is needed to replace the Station with. With an xDSL connection a modem with a custom firmware like OpenWrt has to be used, most likely one based on a Lantiq SoC.
For a FTTH internet connection then every machine with at least two gigabit ethernet interface and a decent CPU will do it.Software setup
PPPD by default puts its PID in the Host-Uniq field, while, as previously mentioned, Vodafone requires the Station serial number in it.
PPPD needs to be patched to set an arbitrary Host-Uniq field, but in decent distributions like Debian or OpenWrt the patch is already included.ConfigurationLine setup
Two separate WAN interfaces must be configured, for data and voice. The required setup depends on the connection type, ADSL, VDSL2 or FTTH.
With an ADSL connection you should use 10/36 as VPI/VCI for data, and 10/35 for voice, both of them configured with LLC encapsulation.
With a VDSL2 or FTTH connection you have to create two tagged VLANs with VID 1036 for data and 1035 for voice.Vodafone Station Firmware Hack ApkPPPoE
Once the ATM circuits or VLANs are configured, bring two PPPoE interfaces up for data and voice.
PPPoE configuration is a bit tricky because the Station serial number needs to be put in the Host-Uniq tag.
The serial number is in the form X12345678901234 where X is the Station manufacturer:Vodafone Station Firmware Hack Android
*D ADB
*C/S Sercomm
*W Huawei
Convert it to hex:
and pass the argument host-uniq 583132333435363738393031323334 to PPPD to bringup the PPPoE connections.
In Debian it can be put globally in /etc/ppp/options or in the providers file in /etc/ppp/peers.
In OpenWrt then edit /etc/config/network and in the wan section add host_uniq=583132333435363738393031323334.Data
The data PPPoE connection must use the Station serial number prepended with D- as username,
and something in the form of VJ|5.4.8.1.160.12.56.1.28|RA|CGN=1|pw=Vodafone as password, which means:
VJ stands for Vodafone Jungo (now OpenRG, the closed, crappy, monolithic, obsolete software inside the Station)
5.4.8.1.160.12.56.1.28 is the Station software version
RA don’t really know
CGN=1 Carrier Grade Nat enabled
pw=Vodafone lol?
For example, in Debian a provider file this in /etc/ppp/peers/data will work:
and add this line in /etc/ppp/pap-secrets:Voice
The voice PPPoE connection must use the Station serial number prepended with V- as username, and vodafone as password.
In your beloved Debian system it can be done by creating /etc/ppp/peers/voice with this content:
and this entry in /etc/ppp/pap-secrets:Vodafone Station Firmware Hack Pc
The SIP and RTP server are accessible only via the voice WAN and belong to the 10.0.0.0/8 subnet.
To access them create a script which configures that route every time that the voice WAN brings up,
I used to put this script in /etc/ppp/ip-up.d/0002route:
Getting the SIP credentials is difficult but not impossible, you have to query the ACS server to get them.Connect
To connect both PPPoE sessions simultaneously, the two VLAN must have different MAC addresses, so one of the two interface address mus be spoofed.
Now it should be possible to connect with pon pppoe-data and pon pppoe-voice or with ifup, if the network is configured in /etc/network/interfaces.
Here there is a working Debian configuration:Vodafone Station Firmware Hack Download
Don’t ever try to use crappy software like systemd-networkd or NetworkManager to do such network configuration:
system-networkd doesn’t supports PPPoE and never will because ’It’s importance is questionable in modern OSs’,
NetworkManager does a little better, it supports PPPoE but not over a VLAN, so no way either.Multiple sessions
Multiple PPPoE sessions can be raised, but they must have different MAC addresses and Host-Uniq.
An option cuold be using a macvlan over the VLAN, like:
and then starting another PPPoE session over the veth1 device, with another Host-Uniq.
The session will get a public IP and extra bandwidth ;)Dyndns
A fancy hostname like vox1234567.mynet.vodafone.it is assigned to every Vodafone line, where 1234567 is the line identifier, which is written in the phone bill.
The hostname can be used as free and reliable dyndns, and it’s also the ONT authentication token.Conclusion
I’ve made this tutorial because I find the Station extremely buggy and feature limited, and I really hate that Vodafone forces me to use this crappy, OpenRG based device.
It’s not my intention to harm or damage any of the parties involved in developing, selling or using this device.
I just want to use my fiber line with a customizable, reliable and powerful device, like my x86 based Debian box, nothing more, nothing less.
cheers and happy hacking,
teknoraver
Download here: http://gg.gg/w9u6i
https://diarynote-jp.indered.space
*Vodafone Station Firmware Hack Apk
*Vodafone Station Firmware Hack Android
*Vodafone Station Firmware Hack Pc
*Vodafone Station Firmware Hack DownloadUpgrade modem firmware
This page explains how you can upgrade the firmware on the following Vodafone modems:
Jul 05, 2020 Here we talk about some free tricks through which you can get Vodafone free Data Hack and talk time recharge.Readers, if you are a Vodafone user, so it’s a big opportunity to get free balance recharge.Through Vodafone Free Recharge Hack Trick you can free 3G internet and many other small data recharges.If you are Android users and fed up with. Vodafone Station Hacking Ceskho-OpenCode feat tails92 “Vodafone Station hacking” – pag. 1 INTRODUZIONE Breve guida alla modifica del firmware interno alla Vodafone Station per poter usare la macchina infernale anche con altri operatori diversi da Vodafone.Vodafone Ultra Hub
H500-t Ultra Hub PlusVodafone B315 Vodafone B525 Vodafone wireless modem
(aka Vodafone HomeHub - HG659Vodafone B818Before you begin
You should only upgrade your modem’s firmware when requested by our Technical Support team.
We recommend that you backup your modem’s configuration. To find out how, select your modem and follow the steps for ’Back up your configuration’:
Please note: This option is not available on the Vodafone B525.How your settings could be affected
In most cases you will be able to update your modem’s firmware without any impact to your services. However, it is important that you are aware that this firmware update:
*Could remove any custom or advanced configuration settings in your modem
*May change the current default Admin password of your device
*If you have a phone(s) attached to your modem, there will be a disruption to services during the upgrade. You can minimize the impact by backing up and restoring your modem configuration.Steps
Select your modem:Ultra Hub and Ultra Hub Plus
*Download the firmware file to your computer:
> Download Ultra Hub firmware
> Ultra Hub Plus
*Open a web browser and go to 192.168.1.1
The Welcome screen appears
*Complete the following fields:
*Username: vodafone
*Password: You can find this on the bottom of your modem
*Click Log In
The Overview screen appears
*Click the Settings tab
*On the top drop-down menu, select Advanced Mode
*From the left-hand menu, click Firmware Update
The Firmware Update screen appears
*In the Manual Firmware Update section, click Select File
*Select the downloaded firmware and click Install update
The Firmware Update confirmation pop up appears
*Click Apply
The uploading Firmware File pop up appears
After the file is uploaded, the updated Firmware will begin installing
The firmware upgrade process takes about 5 minutes
Please ensure you do not turn of your modem while the Firmware is being installedVodafone wireless modem (HG659)
*Download the firmware file and save it to an easily accessible location on your computer
*Filename: HG659-16V100R001C206B026_main.bin
*File size: Approximately 18MB
*Browse to your modem’s admin page (usually http://192.168.1.1 by default)and log in with the following details:
*Default username Admin
*Default password, either:
VF-NZhg659 (note - case sensitive)
or
@ and then the last eight digits of your modem’s serial number. (E.g. @12345678)
*Before continuing, ensure that you have backed up your modem configuration
*Click the Maintain tab
*Click Device Management
*Click Firmware upgrade
*Click File and browse to the firmware file location on your computer
*Select the .bin firmware file, and click Upgrade
*Wait for the firmware upgrade to complete (this may take between 10 to 15 minutes and your modem will automatically restart when it completes)
*Do not navigate away from the page
*After the modem restarts, the modem interface appears. The firmware upgrade is now complete and your modem will automatically re-establish an internet connection. If you have a phone connected to your modem, the configuration file will automatically be downloaded and applied approximately 5-10 minutes after the upgrade.
Below is a list of changes in August 2016 firmware release.
*Separation of 2.4GHz and 5GHz SSIDs
*Improvement in 5GHz auto channel selection
*Update to DTMF signalling to improved compatibility.
N.B. Post upgrade, the modem will show 2 wireless networks instead of 1. The 2.4GHz network will show the SSID name, whereas the 5GHz network will now show the SSID name followed by -5g.
You will need to select either one or both depending on which network their device is capable of using with the preference being 5GHz where possible.Vodafone B818
*Open a browser and go to 192.168.1.1
*Enter your password
Note: The default password is listed on the modem sticker
*From the top-menu, click Advanced
*From the left-side menu, click Updates
*From the options below, select how you’d like to update your firmwareAutomatically
*Enable the Overnight updates toggle
*Click Check for Updates
Manually
*Click Local Update
The Local Update popup appears
*Browse for the downloaded file on your computer and then click Update
Vodafone B315
You can update your modem’s firmware using your PC connected to the modem via Wi-Fi or an Ethernet cable; or using an app on your smartphone (iOS or Android) connecting via Wi-Fi.
Please note that the firmware update process will take about 15-20 minutes.
Vinyl Master Pro V4 Keygen Torrent - DOWNLOAD (Mirror #1) d77fe87ee0 Download VinylMaster Xpt for Windows now from Softonic: 100%. Extras: Vinyl Sign Cutter. 2011 vinylmaster pro v4 0 crack - Kryptos Global Download - softpedia VinylMaster Ltr Vinyl Sign Cutter Software. VinylMaster Pro Crack With Activator VinylMaster Pro is an advancҽd and rҽliablҽ softwarҽ utility dҽvҽlopҽd to assist usҽrs in crҽating original signagҽ artworқ, with limitҽd ҽffort, allowing thҽm to gҽnҽratҽ grҽat quality rҽsults. Following an installation of a fairly modҽratҽ lҽngth, usҽrs can run thҽ application and sҽlҽct thҽ ’Dҽsign Modҽ’ thҽy wish to worқ. Vinyl master pro torrent.
The current firmware version is: 21.329.01.01.1085Update your modem’s firmware using your computer
Please ensure your computer is connected to your modem’s Wi-Fi or connected directly using an Ethernet cable.
*Using a web browser, log into your modem using the address http://192.168.1.1
*You will see a notification that the update is available
*Login as an admin user
The default username and password are both ‘admin’
*You will see a prompt to update your password, click LATER
*Select UPDATE NOW to start the process
*The software will begin downloading and then installing onto your modem
*Once completed, you will see a notification that update is done
*Login as an admin user
The default username and password are both ‘admin’
*Check your SSID (Wi-Fi name)
*Select Auto Update, click FINISH
*If you have the default admin login and password, you will be prompted to update this
*You’ll then have the option to update your Wi-Fi name
*The modem will then save your new configuration and confirm with SUCCESS
*You can then review the settings and you’re done.Update your modem’s firmware using your iOS/Apple device
Please note you will need the HUAWEI HiLink (Mobile WiFi) app, which is available for free from the Apple App Store - search for HUAWEI HiLink and download. Also available for iPad.
Please ensure your device is connected to the Wi-Fi from your B315 modem.
*Open the HUAWEI HiLink app
*The app will prompt you for login details for your device
*Login as an admin user
The default username and password are both ‘admin’
*You will see a notification that an update is available, click UPDATE
*The software will start downloading to your modem
*Once downloaded the modem will start updating itself
*Your modem will shut off the Wi-Fi connection and once available again you will need to reconnect to your Wi-Fi once the modem has completed updating its software and restored the Wi-Fi.
*If you have the default admin login and password, you will be prompted to update this
*You’ll need to enter ‘admin’ as your current password and think of a new one and confirm it
*You’ll then be prompted to login as administrator - use your new password!
*In the app, tap the SETTINGS icon - blue gear image top right to check on your device’s settings.
*There you’ll be able to see info about your device as well as where to see when updates are available in the future.
Update your modem’s firmware using your Android device
Please note you will need the HUAWEI HiLink (Mobile WiFi) app, which is available for free from Google Play - search for HUAWEI HiLink and download.
Please ensure your device is connected to the Wi-Fi from your B315 modem.
The app will prompt you for login details for your device.
*Login as an admin user
The default username and password are both ‘admin’
*You will see a message about using the default password, please hit CANCEL
*You will see a notification that an update is available, click UPDATE
*The software will start downloading to your modem
*Once downloaded the modem will start updating itself ‘The device is rebooting … please wait’
*Your modem will shut off the Wi-Fi connection and once available again you will need to reconnect to your Wi-Fi once the modem has completed updating its software and restored the Wi-Fi.
*If you have the default admin login and password, you will be prompted to update this
*You’ll need to enter ‘admin’ as your current password and think of a new one and confirm it
*You’ll then be prompted to login as administrator - use your new password!
*In the app, tap the SETTINGS icon - blue gear image top right to check on your device’s settings. There you’ll be able to see info about your device as well as where to see when updates are available in the future.
Vodafone B525
*Open a browser and go to 192.168.1.1
The Home screen appears
*From the top-right side of your screen, click Log in
*Complete the following fields
*User name:
*Password:
Please note: Your username and password were created when you first set up your modem
*Click Log in
*Click the Update tab
The Update screen appears
*From the options below, select how you’d like to update your firmware:
Automatically
*From the left-side menu, select Online Update
*Click Check for Updates
If there is a new firmware version available, you are given the option to download it.Manually select a file on your computer
*From the left-side menu, select Local Update
*Click Browse..
The File Upload window appears
*Find the file and click Open
*Click Update
After the update is complete, a confirmation message appears.Was this answer helpful?
Please note: we cannot respond to any requests made via this form; however, you can contact us for further assistance.Please help us to improve this answer *RequiredRelated AnswersHow to replace the Vodafone Station with your very own router
Vodafone forces its customers to use their modem/router, the ’Vodafone Station’: using any other router is impossible because authentication is being done via a custom PPPoE setup.
In the PPPoE packet there is a field named Host-Uniq which is used to separate packets from different PPPoE sessions: Vodafone requires the Station serial number to be put in this field as authentication.Hardware setup
A Linux router with root access is needed to replace the Station with. With an xDSL connection a modem with a custom firmware like OpenWrt has to be used, most likely one based on a Lantiq SoC.
For a FTTH internet connection then every machine with at least two gigabit ethernet interface and a decent CPU will do it.Software setup
PPPD by default puts its PID in the Host-Uniq field, while, as previously mentioned, Vodafone requires the Station serial number in it.
PPPD needs to be patched to set an arbitrary Host-Uniq field, but in decent distributions like Debian or OpenWrt the patch is already included.ConfigurationLine setup
Two separate WAN interfaces must be configured, for data and voice. The required setup depends on the connection type, ADSL, VDSL2 or FTTH.
With an ADSL connection you should use 10/36 as VPI/VCI for data, and 10/35 for voice, both of them configured with LLC encapsulation.
With a VDSL2 or FTTH connection you have to create two tagged VLANs with VID 1036 for data and 1035 for voice.Vodafone Station Firmware Hack ApkPPPoE
Once the ATM circuits or VLANs are configured, bring two PPPoE interfaces up for data and voice.
PPPoE configuration is a bit tricky because the Station serial number needs to be put in the Host-Uniq tag.
The serial number is in the form X12345678901234 where X is the Station manufacturer:Vodafone Station Firmware Hack Android
*D ADB
*C/S Sercomm
*W Huawei
Convert it to hex:
and pass the argument host-uniq 583132333435363738393031323334 to PPPD to bringup the PPPoE connections.
In Debian it can be put globally in /etc/ppp/options or in the providers file in /etc/ppp/peers.
In OpenWrt then edit /etc/config/network and in the wan section add host_uniq=583132333435363738393031323334.Data
The data PPPoE connection must use the Station serial number prepended with D- as username,
and something in the form of VJ|5.4.8.1.160.12.56.1.28|RA|CGN=1|pw=Vodafone as password, which means:
VJ stands for Vodafone Jungo (now OpenRG, the closed, crappy, monolithic, obsolete software inside the Station)
5.4.8.1.160.12.56.1.28 is the Station software version
RA don’t really know
CGN=1 Carrier Grade Nat enabled
pw=Vodafone lol?
For example, in Debian a provider file this in /etc/ppp/peers/data will work:
and add this line in /etc/ppp/pap-secrets:Voice
The voice PPPoE connection must use the Station serial number prepended with V- as username, and vodafone as password.
In your beloved Debian system it can be done by creating /etc/ppp/peers/voice with this content:
and this entry in /etc/ppp/pap-secrets:Vodafone Station Firmware Hack Pc
The SIP and RTP server are accessible only via the voice WAN and belong to the 10.0.0.0/8 subnet.
To access them create a script which configures that route every time that the voice WAN brings up,
I used to put this script in /etc/ppp/ip-up.d/0002route:
Getting the SIP credentials is difficult but not impossible, you have to query the ACS server to get them.Connect
To connect both PPPoE sessions simultaneously, the two VLAN must have different MAC addresses, so one of the two interface address mus be spoofed.
Now it should be possible to connect with pon pppoe-data and pon pppoe-voice or with ifup, if the network is configured in /etc/network/interfaces.
Here there is a working Debian configuration:Vodafone Station Firmware Hack Download
Don’t ever try to use crappy software like systemd-networkd or NetworkManager to do such network configuration:
system-networkd doesn’t supports PPPoE and never will because ’It’s importance is questionable in modern OSs’,
NetworkManager does a little better, it supports PPPoE but not over a VLAN, so no way either.Multiple sessions
Multiple PPPoE sessions can be raised, but they must have different MAC addresses and Host-Uniq.
An option cuold be using a macvlan over the VLAN, like:
and then starting another PPPoE session over the veth1 device, with another Host-Uniq.
The session will get a public IP and extra bandwidth ;)Dyndns
A fancy hostname like vox1234567.mynet.vodafone.it is assigned to every Vodafone line, where 1234567 is the line identifier, which is written in the phone bill.
The hostname can be used as free and reliable dyndns, and it’s also the ONT authentication token.Conclusion
I’ve made this tutorial because I find the Station extremely buggy and feature limited, and I really hate that Vodafone forces me to use this crappy, OpenRG based device.
It’s not my intention to harm or damage any of the parties involved in developing, selling or using this device.
I just want to use my fiber line with a customizable, reliable and powerful device, like my x86 based Debian box, nothing more, nothing less.
cheers and happy hacking,
teknoraver
Download here: http://gg.gg/w9u6i
https://diarynote-jp.indered.space
コメント